Linker Kit

Sort by




Linker Base Shield for Link Node D1 V2.0

LinkNode Base Shield for LinkNode D1

$4.29
Linknode D1 Base Shield is a LinkNode serial sendor shield for LinkNode D1. Than ever before, its interface more robust, more durable. In the future we will launch a large number of LinkNode series of sensors. Feature GPIO x 7 I2C x...
0
Linker Temperature and Humidity Sensor

Linker Temperature and Humidity Sensor

$9.00
Introduction This is a powerful sister version of our Linker kit - Temperature and Humidity Sensor. It has more complete and accurate performance. The detecting range of this sensor is 5% RH - 99% RH, and -40°C - 80°C. And its accuracy...
0
Linker Air Pressure Sensor

Linker Air Pressure Sensor

$9.00
Introduction This is a sensor module for the Bosch BMP180 high-precision, low-power digital barometer. The BMP180 offers a pressure measuring range of 300 to 1100 hPa with an accuracy down to 0.02 hPa in advanced resolution mode. It’s based on...
0
Linker kit Base Shield for Beaglebone

Linker kit Base Shield for Beaglebone

$9.99
This is a Linker kit base shield for Beaglebone. All the Linker kit modules can be plugged onto Raspberry Pi through this base shield.   Specification   There are 8 4-pin 2.54mm spacing housing on the base shield:   Digital:...
0
Linker Serial Servo Module for pcDuino/Arduino

Linker Serial Servo Module for pcDuino/Arduino

$9.99
Serial Servo Driver is a servo driver board that can drive up to  8 servos with a  precision of  5us. The communication interface is TTL UART serial port, and compatible with Linker kit interface.   Specification: Number of...
5 (1)
Flame Sensor Module of Linker Kit for pcDuino/Arduino

Flame Sensor Module of Linker Kit for pcDuino/Arduino

$3.20
Flame sensor module of Linker kit is only sensitive to the light in the frequency band of infrared and ultrviolet. This breakout board has 3 useful pins: sensor output signal, power, and ground. The sensor output signal is an analog signal. In an indoor...
0
Compare up to 4 items:
Clear Selection