Communication Protocol:  3-wire SPI, 4-wire SPI, and I2C.   Interface headers: GND: ground VCC: 2.8-5.5V D0: clock D1: data RES: reset DC: data/command select CS: chip select   Specification: Resolution:...

Linker OLED module is an OLED display measured at  0.96 ” and with a  resolution of  128 x 64. It communicates with the host through IIC interface. It is of  high brightness, wide view angle, low power consumption, and small...

This is a 4-wire analog touch screen originally designed for a cellphone. Add this touch screen to any LCD you want! Readings are taken by putting 5V across two of the pins and doing an analog to digital conversion on the other two pins. Full X and Y...

This backpack provide SPI/I2C serial interface to the otherwise parallel 16x2 LCD. There is a switch on the board to select which communication mode we can use. A potentiometer is provided to adjust the backlight. Also, an ON/OFF switch is provided...