The MC14489 is a flexible light–emitting–diode driver which directly interfaces to individual lamps, 7–segment displays, or various combinations of both. LEDs wired with common cathodes are driven in...

Features 1.6 µA Typical Quiescent Current Input Operating Voltage Range: 2.3V to 6.0V Output Voltage Range: 1.2V to 5.0V 250 mA Output Current for output voltages ≥ 2.5V 200 mA Output Current...

The MCP4017/8/9 devices offer a wide range of product offerings using an I2C™Compatible interface. This family of devices support a 7-bit resistor network, volatile memory configuration, and...

NE555 – Timer IC (DIP Package) IC, TIMER Operating Mode: Astable / Monostable No. of Timers: 1 Clock External Input: No Frequency: 500kHz Supply Voltage Range: 4.5V to 16V Digital IC Case...

These are common NPN transistor BC548 rated at 0.1A/30V.   Download:    BC548 WiKi

The LM358 is a great, easy-to-use dual-channel opamp. Opamps have so many applications we figured we should probably carry at least one in a DIP package. LM358 applications include transducer...

Opto-isolator with transistor output for interfacing to noisy loads. This 16-pin dip can be used in conjunction with relays, small motors, etc. to allow a simple microcontroller to turn on and off up...

IC, 8BIT MCU, PIC18F, 48MHZ, DIP-28 Controller Family/Series:PIC18 Core Size:8 bit No. of I/O's:24 Program Memory Size:16 kWords EEPROM Memory Size:256Byte RAM Memory Size:2KB CPU...

The DS1077 is a dual-output, programmable, oscillator requiring no external components for operation. The DS1077 can be used as a processor-controlled frequency synthesizer or as a standalone...

Add a RTC to 8-bit MCU! The DS3234 is a low-cost, extremely accurate SPI bus RTC with an integrated temperature compensated crystal oscillator (TCXO) and crystal. Features: Battery Backup Input...

The 'must have' IC for 5V projects. This is the RS232 converter IC that is capable of running at 5V and communicating with 5V logic.This chip comes in a 16-pin DIP package. Requires four external...

The 'must have' IC for 3V projects. This is the RS232 converter IC that is capable of running at 3V and communicating with 3V logic. Comes in an easy to solder 16-Pin SOIC SMD package. Requires four...