Triple Color LED Matrix! This large matrix has 64 Red, 64 Green, and 64 Blue individual LEDs built into one common cathode housing. It's a monster to control, but just imagine what kind of colors you could produce by mixing!    

8X8 LED Matrix with red color. This matrix has a size of 1.25"X 1.25" with 64 Red LEDs.       For detailed instruction, please go to:   http://www.arduino...

LEDs - those blinky things. 5mm LED. It will blink through Red, Green, and Blue automatically without any control. Just power it up.  

LEDs - those blinky things. A must have for power indication, pin status, opto-electronic sensors, and fun blinky displays. This is a transparent LED emitting blue with a diameter of 5mm.

LEDs - those blinky things. A must have for power indication, pin status, opto-electronic sensors, and fun blinky displays. This is a transparent LED emitting green with a diameter of 5mm.

LEDs - those blinky things. A must have for power indication, pin status, opto-electronic sensors, and fun blinky displays. This is a transparent LED emitting red with a diameter of 5mm.

      Download:   Arduino Sample Code

8X8 LED matrix has too many pins that Arduino is difficult to interface. This kit shows how to use an interface chip MAX7219 to interface Arduino to drive 8X8 LED matrix. This is a 8X8 LED matrix kit that includes the...

This is 8 digital bits serial LED display. It features a flick free display and SPI interface which allows more than 2 modules can be serial linked.  Specification Power Supply:5V Digital Bits: 8  LED Color:...

 Ever hear of a thing called RGB? Red, Green, Blue? How about an RGB LED? These 5mm units have four pins - Cathode is the longest pin. One for each color and a common cathode. Use this one LED for three status indicators or pulse width modulate all...

This is a special type of LED that has an RED arrow pointing. The rated voltage is 9A, and current is 20mA.   Schematics:

This is a type of LED used to form a dotted line. There are 5 segments, and each segment has two pins, and it has a total of 10 pins. It's pretty straightforwar to use it. Please make sure to use a current limit resistor to limit the current, otherwise...