A breakout board with 8 channel 5V DC relay. The control signal is DC 5V - 7.5V. It can control 10A 250VAC, 10A 30VDC load.
Size: 90mm X 70mm X 20mm.
The major component is EL817 and SRD-DV5V-SL-C.
Features:
- Outputs have LED indicators.
- The input can be directly controlled by MCU's IOs.
- Use diode to protect
- Response time < 20ms
- Relay can operate more than 100 thousands times.
- Eight channels can be controlled at the as time.
- Independent input/output power supplies.
Interface Definitions:
Input:
- GND -- Negative Power Supply
- VCC -- Positive Power Supply
- IN1 -- Control Signal No. 1 (Active Low, activate the relay)
- IN2 -- Control Signal No. 2 (Active Low, activate the relay)
- IN3 -- Control Signal No. 3 (Active Low, activate the relay)
- IN4 -- Control Signal No. 4 (Active Low, activate the relay)
- IN5 -- Control Signal No. 5 (Active Low, activate the relay)
- IN6 -- Control Signal No. 6 (Active Low, activate the relay)
- IN7 -- Control Signal No. 7 (Active Low, activate the relay)
- IN8 -- Control Signal No. 8 (Active Low, activate the relay)
- V- -- Negative Power Supply of Relay
- V+ -- Positive Power Supply of Relay
