Sort by

DC Barrel Jack Plug - Male

DC Barrel Jack Plug - Male

$0.89
This jack is compatible with 5mm barrel jacks that have a 2.1mm center pole diameter. The outer shell unscrews to reveal solder terminals and a crimp strain relief. The outer shell has strain relief as well.
0
Foot Pedal Switch

Foot Pedal Switch

$6.99
This is a foot pedal swtich to free your hands. It has three wires to support two modes: normally on and normally off. The wire has a length of around 2 meters.
0
Trimpot 10K with Knob

Trimpot 10K with Knob

$0.79
This 10K trimmable potentiometer has a small knob built right in and it’s breadboard friendly to boot! Perfect for your next LCD contrast adjuster, opamp setting, or volume level.   Download:   Datasheet
0
DC to DC step down with an output of 5V@5A

DC to DC step down with an output of 5V@5A

$9.99
When we want to design Raspberry Pi into a real product, we often come into situation where the system can only provide a single voltage, for example, 24V. This DC to DC step down module addresses the problem by allowing a single external system power...
0
Linker kit Base Shield for Beaglebone

Linker kit Base Shield for Beaglebone

$9.99
This is a Linker kit base shield for Beaglebone. All the Linker kit modules can be plugged onto Raspberry Pi through this base shield.   Specification   There are 8 4-pin 2.54mm spacing housing on the base shield:   Digital:...
0
Copper Tape -8mm (50ft)

Copper Tape -8mm (50ft)

$3.50
Copper tape has countless applications in electronics from creating low-profile traces for electrical components to RF-shielding and antenna-making.  Copper tape can also be used to do scratch for pcDuino projects.     This copper tape...
0
Compare up to 4 items:
Clear Selection