Introduction This is a Bluetooth module for raspberry pi, which uses the chip nRF51422, the factory firmware is set to transmit transparently mode. The module comes up with the download port, and...

Features   4 in 1, suit for DIYIRM, infrared receiver module Temperature Sensor Joystick Buzzer Compatible with expansion boards like DVK512 Connections are controlled by...

Support Raspberry Pi B/B+ Driver chip: MAX7219 Dot matrix type: 16x8 common cathode red dot matrix   Download:   User Manual    

By adding this pair of infrared LEDs to the Raspberry Pi Camera Module 5MP Wide Angle 160 degree,  we can make a secutiry camera with night vision using Raspberry Pi. 

This is a GPIO ribbon cable for Raspberry Pi B+.  It can break out the 2x20 headers of Raspberry Pi B+ to a breadboard. It is with a length of 8.5". 

This is a 5 foot long HDMI to DVI cable. It supports 1080P. It supports pcDuino.    Download:     Product Wiki

This is a infrared remote control kit for Raspberry Pi. By intall the small IR receiver on the Raspberry Pi, you can control XMBC using remote control.     Download: Tutorial

This shield addes the IR transceiver to Raspberry Pi.   Specifications:   1. Infrared Receiver: Frequency: 38KHz Receiving distance: 18-20m Receiving angle: +/- 45 degree 2. Infrared T

This is an add on learning shield for Raspberry shield. It has 6 LEDs, one button and one buzzer. The sample python codes can be found at:  

This is a GPIO ribbon cable for Raspberry Pi.  It can break out t

The Screw Proto Shield extends all pins of the Raspberry Pi out to 3.5mm pitch screw terminals.  It also includes a protoshield.    Note: The raspberry pi itself is NOT included.