5/5
Great hotbed.
Very nice piece. Large, solid soldering pads with LED pads as well. Best of all, I had it in 4 days of ordering. Thanks for the quick delivery.
MK2B is the latest and the best type of heatbed money can buy as of today. 100% compatible with all Prusa and Mendel 3d printer variants.
Specifications:
-
Color: Black
-
Etching: 35um copper
-
Dimensions 214mmx 214mm
-
Laminate FR4 1.6+-0.15mm
-
2 layer, 35μm copper
-
Red Soldermask - both sides
-
White Silkscreen - both sides
-
Power Input: 12V or 24v
-
copper plated holes
-
resistance between 1.0 and 1.2 ohm
Further changes:
-
A mounting hole in the middle of one edge to allow for easier bed leveling thanks to Nophead for this suggestion.
-
Larger LED and Resistor pads to allow for 1206 size surface mount components.
-
Much larger area to solder the current carrying wire, easily connect ribbon cable (such as with the Mendel90 headbed connection). Also the through holes increased in size.
-
The redundant pads on the non-heating element side of the board removed to prevent confusion. These are not electrically connected if the board is not plated (plated boards are bad for the reasons outlined by Josef Prusa above).
