Breakout Board

Sort by




Linker Base Shield for Link Node D1

Linker Base Shield for Link Node D1

$2.62
This is the sensor base shield of Linker kit. It can accept the connection of various modules of Linker kit. This shield can be used with Link Node D1.   Features 6 Digital connectors (GPIO0-GPIO5,GPIO12-GPIO16) 1 Analog connector (A0) 4 I2C...
0
Xbee Breakout

Xbee Breakout

$0.49
This is a simple breakout board for the popular XBee product.This board breaks out all 20 pins of the XBee to a 0.1" standard spacing dual row header. The spacing between 0.1" headers is 0.5" making it breadboard DIP friendly. We highly recommend using...
5 (2)
TTL Level Shifter

TTL Level Shifter

$1.95
If you've ever tried to connect a 3.3V device to a 5V system, you know what a challenge it can be. The LinkSprite logic level shifter is a small device that safely steps down 5V signals to 3.3V and steps up 3.3V to 5V. This level converter also works...
0
TEMT6000 Breakout Board

TEMT6000 Breakout Board

$4.90
Basic breakout board for the TEMT6000 Ambient Light Sensor. Only what you need, nothing you don't. Sensor acts like a transistor - the greater the incoming light, the higher the analog voltage on the signal pin. Documents: Datasheet Wiring...
0
SOT23 to DIP Adapter

SOT23 to DIP Adapter

$0.55
6 pin SOT-23 to DIP adaptor. Created to take SOT23 of various pin sizes breakout to DIP. This will work with 3-pin MOSFETs, BJTs, Voltage Regulators (SOT-23-5), and various other Micro6, Micro5, etc packages.  DIP width is 0.300" (300mil) and will...
5 (1)
SD Card Breakout Board

SD Card Breakout Board

$9.99
$3.00 On Sale
This board does the 3.3V to 5V translation. So you can direcly plug it to Arduino. The Vcc of this board is 5V!   Why? Arduino has 512 bytes EEPROM (which does not loose its contents at power off) and 1024 bytes RAM (which contents are lost at...
0
Compare up to 4 items:
Clear Selection