This is the sensor base shield of Linker kit. It can accept the connection of various modules of Linker kit. This shield can be used with Link Node D1.   Features 6 Digital connectors (GPIO0-GPIO5，GPIO12-GPIO16) 1 Analog connector (A0) 4 I2C...

This is a breakout of U-shape motor speed measurement.   Download: Tutorial

This is a breakout for a SMT LED with RGB colors that can be indivially controlled.   Specifications:   5050 RGB LED R, G, B individually PWM controlled lines Interface voltage: 5V Common-cathode    

This is a breakout board for four infrared emitters of different directions.    Download:   Schematic Arduino sample library 

This is a breakout from SOT23, MSOP10, SOP10 to DIP10.  

This is a handy potentiometer breakout that can be used to adjust signal level in robotics.

This is a simple breakout board for the popular XBee product.This board breaks out all 20 pins of the XBee to a 0.1" standard spacing dual row header. The spacing between 0.1" headers is 0.5" making it breadboard DIP friendly. We highly recommend using...

If you've ever tried to connect a 3.3V device to a 5V system, you know what a challenge it can be. The LinkSprite logic level shifter is a small device that safely steps down 5V signals to 3.3V and steps up 3.3V to 5V. This level converter also works...

MP430 breakout board. TQF64 to LQF64 Breakout. The pin spacing of LQF64 is 2.54mm (0.1').

Basic breakout board for the TEMT6000 Ambient Light Sensor. Only what you need, nothing you don't. Sensor acts like a transistor - the greater the incoming light, the higher the analog voltage on the signal pin. Documents: Datasheet Wiring...

6 pin SOT-23 to DIP adaptor. Created to take SOT23 of various pin sizes breakout to DIP. This will work with 3-pin MOSFETs, BJTs, Voltage Regulators (SOT-23-5), and various other Micro6, Micro5, etc packages.  DIP width is 0.300" (300mil) and will...

This board does the 3.3V to 5V translation. So you can direcly plug it to Arduino. The Vcc of this board is 5V!   Why? Arduino has 512 bytes EEPROM (which does not loose its contents at power off) and 1024 bytes RAM (which contents are lost at...