This is a basic 20 character by 4 line display. Black text on Green background. Utilizes the extremely common HD44780 parallel interface chipset (datasheet). Interface code is freely available. You will need ~11 general I/O pins to interface to this LCD screen.Includes LED backlight.
Works on either 4 bit or 8 bit mode. For Arduino LCD library, Please refer to http://arduino.cc/en/Reference/LiquidCrystal?from=Tutorial.LCDLibrary.
Connections to Arduino:
The circuit:
* LCD RS pin to digital pin 12
* LCD Enable pin to digital pin 11
* LCD D4 pin to digital pin 5
* LCD D5 pin to digital pin 4
* LCD D6 pin to digital pin 3
* LCD D7 pin to digital pin 2
Parallel LCDs run off of +5V so you can just solder the Vcc (pin 2 in LCD)wire to 5V and the ground (pin 1 in LCD) wire to GND.
* 10K resistor:
* ends to +5V and ground
* wiper to LCD VO pin (pin 3)
How to run Arduino examples:
Documents:
