Account Navigation

Account Navigation

Currency - All prices are in AUD

Currency - All prices are in AUD
 Loading... Please wait...
CuteDigi

1080p IR POE Bullet Face Recognition Security Camera

$249.00

1080p IR POE Bullet Face Recognition Security Camera

$249.00
SKU:
CAM-iHD23-2K385-FP-JH-POE
Weight:
4.00 LBS
Shipping:
Calculated at checkout
Share

Product Description

 

Overview

  • Built-in AI deep learning face recognition algorithm, support face detection, face tracking and scoring, pick the best face photo, and reduce the duplicated captures.
  • Support face capture for complex environment. Up to 40 faces can be detected and captured at the same time.
  • Using the face recognition surveillance system, the efficiency is improved by more than 10,000 times! In a non-face recognition surveillance system, it may take hours or even dozens of hours to query an event person. However, only a few seconds are required in the face recognition surveillance system.
  • Upload faces by FTP to remote ftp host

 

Technical Specifications:

  

camera

 

Image Sensor

1/2" 2.0MP SONY CMOS

 

Effect Pixel

1920(H)x1080(V)

 

scanning method

line by line scan

 

Shutter time

1/25s~1/10000s;auto adjust

 

Min Illumination

Color 0.0001Lux@ F1.2;

black & white 0.00001Lux@F1.2;

 

S/N Ratio

50dB(AGC OFF)

 

Wide Dynamic Range

80dB Digital WDR

 

Digital Noise Reduction

3D Digital Noise Reduction

 

Privacy cover

Up to 4 privacy zones are supported

 

Lens mount

9X optical zoom lens 9-22mm

 

video parameter

 

Video compression

H.265/H.264/H.265+MJPEG

 

Video resolution

Main stream

1080P(1920×1080)/720P(1280×720)

 

Sub stream

D1(704×576)/VGA(640*480)/QVGA(320×240)

 

Video Frame

1-2530fps

 

Video Bit rate

32KB ~16Mbps,

 

Image settings

Can adjust the brightness, contrast, saturation, sharpness, white balance; AWB (auto white balance), AGC (AGC), AE (automatic exposure control), AIC (automatic aperture correction); privacy zone occlusion; OSD stack; image rotation: 90 degrees / 270 degrees normal automatic, manual or automatic color to black and other switching mode

 

Smart function

Smart  coding

Support for low bit rate, low latency, ROI region of interest enhancement coding, support 4 ROI regions

Smart sense

Intelligent occlusion detection and intelligent refocus detection

Smart control

Support intelligent control, alarm opening, alarm closing, fault clearing, intelligent noise reduction

intelligent capabilities

 

Intelligent analysis

Face capture, face tracking and face automatic filtering

Image format

Capture image using JPEG encoding

The sensitivity

0-10 adjustable, the lower the sensitivity, the higher the picture quality

Page range

Support for face recognition area selection

Upload

FTP

network parameter

 

The network interface

1 RJ45 10M/100M Adaptive Ethernet port

 

Network protocol

IPv4, HTTP, TCP/IP, UDP, RTP, RTCP, UPNP, RTSP, SMTP, NTP, DHCP, DNS, PPPOE, DDNS, FTP

 

Access standard

Support the latest ONVIF and GB GB28181

 

Support users

Up to 8 users can log in simultaneously

 

APP

iPhoneiPadAndroid

 

General Parameters

 

Housing

White aluminum

 

power supply

DC12V  2A/ POE(802.3at)optional

 

power dissipation

<9W

 

Operate Conditions

-10~55℃,20-80% RH (no condensation )

 

level of protection

196.5*99*87.5mm

 

Infrared distance

1200g

 

Dimensions

no bracket

 

 

  

Dimension(mm):

-2018-11-21-11.46.28.png

 

Introduction for  AISHOP


The AISHOP system platform provides multi-dimensional data analysis and statistical results based on deep learning face recognition, computer vision and big data analysis technology, including store customer traffic, Person attributes (age, gender), VIP customer management. Blacklist (thieves) identification alarms, etc., to help managers arrest thieves, tap potential customers, predict consumption trends, optimize resource allocation, and achieve precise marketing.

aishop-1-1.png

How to add DeepCam Face capture camera to AISHOP system?


AISHOP system supports WEB and APP client access. Whichever way you choose, the basic steps are as follows:

aishop-6.jpg

WEB Page Operation

Setting up International Administrative Regions

When you first log in to your account, you need to set up administrative regions, as shown below.

AISHOP-1-2.png

Add Store

AISHOP-1-3.png

Add Device

AISHOP-1-4.png

a) Enter the camera name and MAC address in turn.The camera MAC address can be obtained by wrapping or by removing the bottom cover of the camera to view the fuselage tag.( The bottom cover of the camera is snap-fastened and can be removed directly without tools.)

The MAC address is a 12-bit string consisting of only numbers and letters. It must be filled in all uppercase.

AISHOP-9.jpg

AISHOP-10.jpg

b) Select “deepcamFaceCapture” for device type

c) Select the corresponding stores that the camera needs to add through the drop-down box in turn

d) Click [Submit] to complete the device addition.

e) On the [Device List] page, you can query the list of added cameras. At this time, the online status is red, indicating that the device is offline.

AISHOP-1-7.png

f) The camera is powered on and waits for about 3 to 6 minutes. When you refresh the page, you can find that the online status is green, indicating that the device is online.

AISHOP-1-8.png

If the camera is powered on before adding the device, please power on the device again and follow the steps described above to ensure that the device is online.

Adjust The Mounting Angle And Focal Length Of The Camera

After the device is online, a very critical step is to adjust the mounting angle and focal length of the camera. Please refer to the installation specification for specific requirements. We can log in to the web page of the webcam or work on the app. Here, we use the login camera web background page as an example.

1. Enter the IP address of the camera in the Internet Explorer address bar and enter the login page. When accessing with IE browser for the first time, plug-ins must be installed. Background Web access only supports IE kernel browsers.

AISHOP-1-5.png

2. User name is SnApAdm1n, password is KEY on the label. In order to ensure the normal operation of the device, please do not modify user name and password at will.

AISHOP-14.jpg

3. After successful login, zoom operations can be performed on the right side of the [Preview] page to make the face captured by the camera clear.

AISHOP-1-6.png

Visiting Records Enquiries

Click [Store] →[Visiting Records], you can select the time to query the visit record.

AISHOP-1-9.png

After clicking on any face image, the detailed information of the face image will appear, and the face will be clustered and displayed.

AISHOP-1-10.png

Add Subject

There are two ways to add the target person: one is to input the external face photos, the other is to add the face captured by the device.

AISHOP-1-11.png

Method 1: Select [Subject] → [Add Subject] to add face photo from the local PC

a) Select the photo of the person you want to add from the local PC.

b) When a person’s photo is added from a local PC, the system will detect and intercept the face part of the photo. If there are more than one person in the photo, the system will return several face photos for selection. Please click on the face photo of the target person you want to add.

c) Enter the name of the target person in turn, select the corresponding grouping, choose whether to open the message push or not, and choose to enter the comment information.

d) Click [Submit] to complete the entry of the target person addition

f) Click [Subject List], you can see the successfully added person and modify their names, groupings, whether to open message push, notes.

Method 2: Click on [Stores] → [Visiting Records], then click on the photo of the target person you want to input. and input the captured face by clicking on “Add Subject”

AISHOP-1-12.png

Adding More Face Photos To The Target Person

Click [Subject] →[Subject List], then click icon to add more face photos of target persons.

AISHOP-1-13.png

a) Drag the appropriate threshold and click [Search]

b) In the search results, select the clear face photos of the same person that you want to append and click on [append]. Maximum 5 face images are allowed to be appended by association.

c) When the addition is successful, the result will be displayed on the right side of the person’s main picture, as shown in the following figure

AISHOP-1-14.png

d) Additional images can be deleted. It should be noted that the first registered face image, that is, the main image of the person is not allowed to be deleted, and can only be operated by deleting the target person, but also means that the subsequent identification records of the person before deletion can not be queried.

Query Statistical Reports

Click [Reports] → [Traffic Statistics] to view the statistical data analysis of passenger flow, age and gender.

AISHOP-1-15.png

De-duplication Traffic refers to one minute de-duplicate filtering statistics, that is, the same person appears in the camera multiple times within 1 minute, and the number of occurrences is counted only once.

If there are multiple cameras under the store, you can perform statistical analysis of the data in any combination.

Create Sub Account

Click [Settings] → [Account Settings] to create sub account

You can select the operation permission level of the new sub-account you will create. In the above picture, when [Company Name] is empty, the current selection is the highest permission level. The same level as the primary account by default. If a company is selected, then sub-accounts can only view and operate the stores belonging to the company. It should be noted that the target person is added to the company’s name, regardless of the rights of the sub-account, you can see all registered personnel.

Alert Settings

Alert Setting means that when the registered target person is recognized by AISHOP platform, the system will push the reminder message to the e-mail or (and) mobile APP client.

AISHOP-1-16.png

About Control Switch:

• Push Notifications Enable. It is the main switch, and the other settings will be valid when it is turned on. If it is closed, the system will not push any messages out.

• Groups control. Each group can be controlled separately. If the switch of one group is off, the system will not push any messages out whether the target person in the group has opened the message push or not. If the switch of one group is on, the target person who opens the receiving message push under the group, the system will push the information to the specified account once it is recognized by the system.

• Push Methods. At present, two push modes can be realized, Email and App. APP push needs to be set up in APP.

APP Operation

Reports Page Display

AISHOP-24.jpg

Stores Page Display

AISHOP-25.jpg

Subjects Page Display

AISHOP-26.jpg

Resources

 


 

 

Resources:

Product Reviews

Find Similar Products by Category